Search
AtlasIED
AtlasIED
Sort by
Display per page
8" Dual Cone in-Ceiling Speaker with 25V/70V 5-Watt Transformer and 62-8 Baffle
10oz Dual Cone Speaker Provides Familiar Response & Performance | Attractive CRS White Powder Coat Baffle | Individually Packaged for Stocking & Ordering Convenience | Quality 5 Watt-Dual Voltage Transformer | ETL Certified, Safety Listed to UL1480.
$37.13
Atlas Sound AS100N
$366.50
AtlasIED 1' x 2' Drop Tile Speaker Package with Perferation Across Entire Tile
All In One, Pre-Assembled Unit Drops Into Ceiling Grids to Reduce Installation Time and Costs | 10oz 8" Dual Cone Speaker with 25V/ 70.7V Transformer | External Tap Selector Switch | Integral E.O. Box for Conduit or Plenum Wire Termination | Low Profile Conical Enclosure
$101.87
AtlasIED 2' x 2' Drop Tile Speaker Package
All In One, Pre-Assembled Unit Drops Into Ceiling Grids to Reduce Installation Time and Costs | Solid White Panel with Punched Speaker Grille Blends in with Most Acoustic Ceiling Tiles | Standard 8" Speaker with Built-In 25V / 70.7V Transformer | UL1480 / UL2043
$101.39
AtlasIED 8" Dual Cone Sound Masking Speaker with 4-Watt 70V Transformer and Enclosure - White
Pre-Assembled Unit Includes 8" dia. Loudspeaker, Transformer, Enclosure, Baffle and Mounting Hardware | Labor-Saving Hardware Package ‰€“ Complete with New Snap Hanger Assembly, Allows Quick and Easy Installation | Innovative Input Panel Includes Combination Knock-Out and Strain Relief Connector to Accommodate Flexible or Rigid Conduit | Design Enables Upward, Downward, or Horizontal Orientation | 734 inå_ Enclosure for Extended Low Frequency Response
$81.32
AtlasIED 8" Dual Cone Sound Masking Speaker with 4-Watt 70V Transformer and Enclosure - White and Round
Sleek, Round Appearance Designed for Mounting in Open Plenum Areas Where Speakers May be Visible | Balanced Enclosure Design to Ensure Level Orientation When Suspended (78" (2m) Suspension Chain Included) | Fully Assembled Package Includes 8" Transducer with High Quality Line Matching Transformer | 0.25 to 4 Watt (@70.7V) Power Selection (Plus OFF) via External Switch | 382in3 (6.26L) Enclosure Volume for Accurate Low Frequency Masking Spectrum Reproduction
$95.05
AtlasIED 8" Open Ceiling Surface Mount Speaker with Enclosure and 4-Watt 25V/70V Transformer
Convenient Lead Wire Extensions Assure Expedited Field Connection | Durable White Powder Coat Finish | Easy-to-Install Loudspeaker Package Includes Provisions for Fast Clamp-Mount Installation to I-Beams and Girders | Package Includes an 8" Dual-Cone Loudspeaker with a Pre-Mounted Transformer, Baffle and Enclosure Equipped with Clamp Mounts | UL Certified, Safety Listed to UL1480
$96.52
AtlasIED BBWP-Touch7B BlueBridge 7-Inch Touch Panel Wall Controller
Atlas Sound BBWP-TOUCH7B
$1,110.09
AtlasIED Deluxe, Rack Mounted 100W Attenuator, 3dB Steps
Attractive Matte Black Polycarbonate Dial Scale Overlay with Adhesive Backing Replaces the Mounting Plate. Includes Skirted Black Knob. | Mount Up to Six Attenuators on Atlas ATPLATE-052 Rack Plate
$34.93
AtlasIED DPA-DAC4 Dante Enabled Accessory Card for Use w/ DPA2402/DPA1202/DPA602
Atlas Sound DPA-DAC4
$520.54
AtlasIED TSD-MIX42RT 4x2 Mic/Line Mixer with Priority Sense and Remote Control
Atlas Sound TSD-MIX42RT
$372.43
AtlasIED VT-152UCN Voice/Tone Surface Mount Compression Driver Loudspeaker
Atlas Sound VT152UCN
$133.05
AtlasIED Wide Angle Horn Speaker with 30-Watt 25V/70V/100V Transformer
High-Powered Compression Driver Projects Superior Voice and Tone Signaling | Includes a 25, 70.7, 100V Transformer with a 45-Ohm Tap | One-Step Method of Adjusting Bell from Horizontal to Vertical Positioning | Wide-Angle Sound Dispersion for Maximum Horizontal Pattern Coverage
$198.20
Compression Driver for Large Format Horn Speakers with 60-Watt 70V Transformer
Driver Provides Accurate Sound Reproduction, Optimum Intelligibility and Dependable Performance | Perfect for High Power 70.7V Public Address Systems | Use with CJ-46 BIA100 and DR Series Horns
$270.97
Constant-Directivity 40w Paging Speaker w Rotating Bell
Coverage of 60 Degrees x 40 Degrees Across a Wide Frequency Range for Predictable Beamwidth Control | Molded of High-Impact, Neutral-Grey Polycarbonate Resin with UV Light Inhibitor | Rotating Bell Pivots in 15 Degree Increments for Exact On-Site Positioning of Projection Angles | Universal 25/70/100V Transformer Includes a Rotary-Dial Selector for Easy Tap Identification | Zinc die cast mounting bracket may be mounted to standard E.O. boxes banded to poles or removed for easy retrofit of existing AP Series loudspeakers.
$134.89
Deluxe Decora Plate Mounted 10W Attenuator, 3dB Steps
Attractive Alternative to Commercial Series Attenuators | Mount into Most 1-Gang E.O. Boxes | White and Ivory Plastic Plates with Matching Skirted Knobs in Decora Style
$31.45
Deluxe Decora Plate Mounted 35W Attenuator, 3dB Steps
Attractive Alternative to Commercial Series Attenuators | Mount into Most 1-Gang E.O. Boxes | White and Ivory Plastic Plates with Matching Skirted Knobs in Decora Style
$36.65
Flanged Horn Speaker with 15-Watt 25V/70V/100V Transformer
Double Re-Entrant Design Provides Superior Audibility of Voice and Tone Signaling | High-Efficiency, 15 Watt Compression Driver with Proven Record of Outstanding Service Reliability | Transformer(T) Equipped Version for 25, 70.7, or 100V Line | Vandal and Environment-Resistant Metal Construction for Outdoor or Indoor Use
$120.28
Horn Speaker with 15-Watt 25V/70V/100V Transformer
High-Efficiency Driver with Proven Performance Reliability | Environment Resistant for Outdoor and Indoor Use | Omni-Purpose‰„ Bracket for Precise Positioning | Superior Intelligibility for Voice and Tone Signaling | Transformer Equipped for Versatile 25, 70.7, or 100V Line Applications
$126.95
Min: $31.00 Max: $2,859.00
$31 $2859
Payment options
