Search
AIRMASTER
AIRMASTER
Sort by
Display per page
Airmaster 18" High Vel Low Stand Pivot Fan/Yoke Mt Te Moto Part# 78984 (1 Ea)
Available in 12", 18", and 20" propeller sizes, Four position easy reach switch with 10' three conductor cord and plug | High stand and yoke mount models adjust 360 degrees, Nickel chrome guards | Meet OSHA regulations, Work station yoke mount attaches to any surface with 1 bolt or lag screw | 115V, 1 Phase, 3 Speed, Open drip proof, Ball bearing motor, Aluminum propellers | 1 Year warranty, UL listed; All stocked ;
$195.49
Airmaster 18" Low Stan Pivot Fan Part# 78974 (1 Ea)
3-speed 18" circulator fan head with floor stand pivot mount | 115V, 1.65 amp, single phase, 1/8 hp, open, drip-proof ball bearing motor | Three speed settings for airflow rates up to 2,966 cubic feet per minute (CFM) | Three cast aluminum paddle blades attached to a steel hub and spider assembly for durability | UL Listed for quality assurance
$166.94
Airmaster 24" Industrial Unit Packassemb Fan Head Non-Osc Part# 37209 (1 Ea)
Totally enclosed air over ball bearing motor
$446.17
Airmaster 30" Comm Unit Pack Wall/Ceiling Mt Air Circ Osc Part# 71582 (1 Ea)
Packaged in one UPS shippable carton, Adjustable pedestal (43" - 63") | 26" Base diameter, Wall/Ceiling mounts with safety cable included | All stocked, 115V, 1/4 HP Non-Oscillating, 1 Phase, 3 Speed, Totally enclosed air over Ball bearing motor | Galvanized steel propeller, 2 Year warranty | 15’ Supply cord and three prong plug included, UL and CUL listed
$532.70
Airmaster 30" Industrial Assembledfan Head - Non Osc Part# 37212 (1 Ea)
Totally enclosed air over ball bearing motor
$550.98
Airmaster 71590_Head Assy Airmaster Fan Part# 71590 (1 Ea)
3-speed 24" circulator fan head for use with Airmaster mount (not included) | 115V, 3.5 amp, single phase, 1/4 hp, permanently lubricated, totally enclosed ball bearing motor | Three speed settings for airflow rates up to 4,400 cubic feet per minute (CFM) | Three galvanized steel paddle blades attached to a steel hub and spider assembly for durability | UL Listed for quality assurance
$392.04
Airmaster 71591_24" Fan Head Part# 71591 (1 Ea)
3-speed 30" circulator fan head for use with Airmaster mount (not included) | 115V, 3.5 amp, single phase, 1/4 hp, permanently lubricated, totally enclosed ball bearing motor | Three speed settings for airflow rates up to 6,100 cubic feet per minute (CFM) | Three galvanized steel paddle blades attached to a steel hub and spider assembly for durability | UL Listed for quality assurance
$366.44
Airmaster Ca30Ape Commercial- 30"Adj. Floor- S.B. Part# 71586 (1 Ea)
3-speed 30" circulator fan head with adjustable-height pedestal mount | 115V, 3.5 amp, single phase, 1/4 hp, permanently lubricated, totally enclosed ball bearing motor | Three speed settings for airflow rates up to 6,100 cubic feet per minute (CFM) | Three galvanized steel paddle blades attached to a steel hub and spider assembly for durability | UL Listed for quality assurance
$549.94
Airmaster Emc42D Replacement Propeller Part# 5242 (1 Ea)
Compatible with Airmaster Airmaster EMC42D (60007) 42" Portable Mancooler
$134.91
Airmaster I-20Ls_20" Air Circulator Fan Flr Mt Part# 78975 (1 Ea)
115V, 1 Phase, 3 Speed, Open Drip Proof, Ball Bearing Motor | Nickel Chrome Guards Meet OSHA Regulations | Pivot Fans have Four Position Easy Reach Switch with 10’ Three Conductor Cord and Plug | 20" Prop Diameter
$175.92
Airmaster Portable Utility Blower/Heater Optional Part# 78967 (1 Ea)
120V, 60 Hz, 3 Speed, 1.77 Amp Draw, Ball Bearing Motor | Can be used for circulation, ventilation and drying of basements, home gyms, garages, job sites, etc. | Up to 300 CFM Airflow | Ideal to dry carpet and other floors | Compact Portable Design with Impact Resistant Shell | Resettable circuit breaker protection | Grounded power cord | Adjustable air direction and carrying handle | Three Speed Selector Switch | Two 120V, 10 Amp Receptacles with Protective Covers
$131.75
Min: $14.00 Max: $832.00
$14 $832
Payment options
