ENERPAC®

Heavy duty high pressure hydraulic rubber hose | Rubber coated with two layers of steel wire braids | Designed to comply with Material Handling Institute IJ-100 hose specification | Flexible, with little memory

Pressure gauge with 2-1/2"-dia. face for measuring and monitoring pressure within a hydraulic system | Lower-mount connection with 1/4" NPTF male threads | Dual scale for reading 0 to 10,000 psi and 0 to 700 bar with +/-1.5% accuracy | Sealed glycerin filling for more stable readings and better visibility than dry gauges | Safety blow-out disk for protection in case of over pressurization

Hydraulics | Manufacturer: Enerpac | Country of Manufacturer: United States

Hydraulics | Made by: Enerpac | Country of Manufacturing: United States

Single-acting hydraulic cylinder with one port and pretensioned spring return of piston rod after 14" stroke | Round body with single piston rod for use in general purpose applications in any position | High-strength alloy steel with baked enamel finish for corrosion resistance | 10-ton cylinder capacity for lifting or pushing | Quick-connect CR-400 female coupler for connection to a CH-604 male coupler (sold separately)

Single-acting hydraulic cylinder with one port and pretensioned spring return of piston rod after 2.13" stroke | Round body with single piston rod for use in general purpose applications in any position | High-strength alloy steel with baked enamel finish for corrosion resistance | 10-ton cylinder capacity for lifting or pushing | Quick-connect CR-400 female coupler for connection to a CH-604 male coupler (sold separately)

Calibrated in dual scale reading in psi and bar | All pressure sensing parts sealed and dampened by glycerine for long life | Includes safety blow-out disk and pressure equalizing membrane | Gauge snubbers or needle valves recommended for high cycle applications

Air pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in settings where compressed air is available or ignition sources are prohibited | Advances and retracts a double-acting cylinder, and can hold a load | Internal pressure relief valve helps prevent pump overload | Two-speed pump for applications where there is little or no load initially, but where increased force is needed when the load is applied | Maximum operating pressure rating of 10,000 pounds per square inch (psi)

Air-powered hydraulic pump for powering single-acting hydraulic cylinder or tool | Three-position treadle for managing flow | 36 cu. in. reservoir for hydraulic fluid | Flow rate of 8 cu. in. per minute at maximum operating pressure of 10,000 psi | Swivel coupling for connecting line or hose

Air pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in settings where compressed air is available or ignition sources are prohibited | Advances and retracts a single-acting cylinder or powers a hydraulic tool, and can hold a load | Three-position treadle for operation by foot or hand | Single-speed pump for applications with a constantly applied load | Maximum operating pressure rating of 10,000 pounds per square inch (psi)

Air pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in settings where compressed air is available or ignition sources are prohibited | Advances and retracts a single-acting cylinder or powers a hydraulic tool, and can hold a load | Three-position treadle for operation by foot or hand | Single-speed pump for applications with a constantly applied load | Maximum operating pressure rating of 10,000 pounds per square inch (psi)

Air pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in settings where compressed air is available or ignition sources are prohibited | Advances and retracts a single-acting cylinder or powers a hydraulic tool, and can hold a load | Internal pressure relief valve helps prevent pump overload | Two-speed pump for applications where there is little or no load initially, but where increased force is needed when the load is applied | Maximum operating pressure rating of 10,000 pounds per square inch (psi)

Air pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in settings where compressed air is available or ignition sources are prohibited | Advances and retracts a single-acting cylinder or powers a hydraulic tool, and can hold a load | Internal pressure relief valve helps prevent pump overload | Two-speed pump for applications where there is little or no load initially, but where increased force is needed when the load is applied | Maximum operating pressure rating of 10,000 pounds per square inch (psi)

Air pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in settings where compressed air is available or ignition sources are prohibited | Advances and retracts a single-acting cylinder or powers a hydraulic tool, and can hold a load | Internal pressure relief valve helps prevent pump overload | Two-speed pump for applications where there is little or no load initially, but where increased force is needed when the load is applied | Maximum operating pressure rating of 10,000 pounds per square inch (psi)

One shot pipe bender | Makes smooth, wrinkle-free bends up to a maximum 90° angle | Made from lightweightdurable heat-treated aluminum | Worksschedule pipes 40, 80, 160extra-lourd