Search

GENERAL TOOLS

GENERAL TOOLS
Sort by
Display per page
Picture of General Tools .0" To .055" Pin Vise Part# 94A (1 Ea)

General Tools .0" To .055" Pin Vise Part# 94A (1 Ea)

The 94A pin vise, is great for holding small tools such as drill bits, deburrers, wires, files, taps reamers and other small tools | Hollow, nickel-plated body allows the pin vise to be used with long rods or wire | It is designed for holding tools .0" to .055" in diameter | Pin vise features a hardened steel collet with a unique jaw capacity for use with varying tool sizes | This vise has the General Tools commitment to durability and long lasting tools
$13.03
Picture of General Tools .025" To .075" Pin Vise Part# 94B (3 Ea)

General Tools .025" To .075" Pin Vise Part# 94B (3 Ea)

The General Tools and Instruments 94B Pin Vise, .025" to .075" is great for holding small tools such as drill bits, taps and reamers | In addition, the body is hollow to allow the Pin Vises to be used with long rods or wire | Each Pin Vise features a hardened steel collet with a unique jaw capacity for use with varying tool sizes | This individual Pin Vise is designed for holding tools from 0.025 to 0.075 inches in diameter | This vise has the General Tools commitment to durability and long lasting tools
$41.98
Picture of General Tools .110" To .187" Pin Vise Part# 94D (3 Ea)

General Tools .110" To .187" Pin Vise Part# 94D (3 Ea)

The General Tools and Instruments 94B Pin Vise, .110" to .1875" is great for holding small tools such as drill bits, taps and reamers, In addition, the body is hollow to allow the Pin Vises to be used with long rods or wire | Each Pin Vise features a hardened steel collet with a unique jaw capacity for use with varying tool sizes | This vise has the General Tools commitment to durability and long lasting tools | Meets U.S. Government Specification GGG-V-412a; Collet cavity opening: 0.11 to 0.187-Inch | Hollow nickel-plated body allows use of a long wire or rods; Length: 4 Inch
$45.28
Picture of General Tools 0-1" Utility Micrometer.001"Grads-Satin Finish Part# 102 (1 Ea)

General Tools 0-1" Utility Micrometer.001"Grads-Satin Finish Part# 102 (1 Ea)

Instructions included. | Measurement range 0 to 1. | Cutaway frame for tight measurements, decimal equivalents and machine-cut black graduations
$25.05
Picture of General Tools 0-6" Dial Caliper Part# 142 (1 Ea)

General Tools 0-6" Dial Caliper Part# 142 (1 Ea)

EASY TO READ: No-glare, easy-to-read dial with adjustable bezel is color-coded to highlight fractional inches | GRADUATED MEASUREMENTS: Caliper dial and bar have graduated inch and millimeter readings; measures up to a maximum of 6 inches (152 mm) | FIBERGLASS REINFORCED PLASTIC CONSTRUCTION: Heavy duty for accurate readings of inside, outside, depth and step measurements | ACCURATE: Freewheeling friction roller provides effortless and accurate readings | CONVERSION TABLE ON BACK: For fractional inch conversion
$34.12
Picture of General Tools 0-6" Electro Digital Caliper Part# 147 (1 Ea)

General Tools 0-6" Electro Digital Caliper Part# 147 (1 Ea)

EXTRA LARGE DISPLAY: Features an extra-large LCD screen and a measurement range of 0 to 6" (153mm). It provides a 3-mode digital display that changes quickly between decimal inches, fractional inches, and millimeters. | AUTO POWER OFF: Fabricated from heavy-duty stainless steel and non-marring carbon fiber, our caliper tool can measure inside and outside diameter, depth, and step measurements. It includes an auto-on/off feature that preserves battery life. | DIGITAL RULER: Provides highly accurate calculations for measuring and fitting joints, checking board thicknesses, and setting cutting depths. Perfect for construction jobs and home improvement projects. | ELECTRONIC CALIPER: Helps make projects and woodworking jobs easier and more efficient. Our angle indicator includes a conversion chart with instructions, a spare battery, battery cover screwdriver, and a protective foam-lined case for easy storage. | GENERAL TOOLS: We have been a recognized leader in the innovation, design, and development of specialized precision instruments for many years. We encourage craftspeople, artisans, and DIYers to work smarter, measure better, and increase productivity. | EXTRA LARGE, EASY TO READ TRI-MODE DIGITAL DISPLAY - The Fraction+ Digital Caliper switches between inches, millimeters and fractions at the touch of a button. | RUGGED STAINLESS STEEL DESIGN - has heavy duty housing and delivers inside, outside, depth and step measurements | PRESERVE BATTERY LIFE - with the Digital Caliper's auto on/off feature | Resolution 0.0005" (0.01mm), Accuracy 0.001" (0.02mm) | INCLUDES: Power Source: SR44 battery, Foam Padded Carrying Case, 1 Year Warranty
$45.95
Picture of General Tools 1" Arch Punch Part# 1271M (1 Ea)

General Tools 1" Arch Punch Part# 1271M (1 Ea)

The General Tools and Instruments 1271M Arch Punch is the ideal punch tool for punching a 1 inch hole | The punch works on leather, rubber, canvas, plastic, sheet metal, gasket material, cardboard and softer metals | The internal punch features an inside taper for clearance | The punches are heat treated forged steel, ensuring long lasting performance | Because of this heat treatment, the cutting edge will stay sharper longer
$17.66
Picture of General Tools 1" X 10'Magnetic Tape Part# 369 (6 Rol)

General Tools 1" X 10'Magnetic Tape Part# 369 (6 Rol)

This adhesive-backed magnetic strip can be mounted to most smooth, clean surfaces to firmly hold small metal objects | The 1/16 inch thickness on this magnetic rope allows you to easily cut the strip to your desired length with a knife or scissors | Flexible magnetic strips have a variety of home and commercial applications | This magnetic strip has a width of 1 inch width and length of 10 feet; ; Also available in different dimensions | Made in the USA
$72.20
Picture of General Tools 1" X 2" Adj. Inspectionmirror 6" Arm Part# 558 (1 Ea)

General Tools 1" X 2" Adj. Inspectionmirror 6" Arm Part# 558 (1 Ea)

Product Type :Tools | Package Dimensions :21.92 Cm L X9.86 Cm W X8.1 Cm H | Country Of Origin :China | Package Weight :2.5Oz
$9.89
Picture of General Tools 1/16" To 1/2" Drill Gage Part# 14 (1 Ea)

General Tools 1/16" To 1/2" Drill Gage Part# 14 (1 Ea)

This item is GENERAL TOOLS & instruments 14 drill Gage, 1/16-inch to 1/2-inch | Used for hand tools & tool Organizers, other hand tools | The product is manufactured in India | General Tools and Instruments 14 Drill Gage helps you to quickly and accurately identify the sizes of stray drill bits in your workshop | These gages can be extremely useful with older, unmarked bits or ones that are too small for markings | Each heat treated, heavy steel gage is machined to close tolerance for spot-on accuracy | The bit sizes and decimal equivalents are permanently etched to the face to provide years of dependable use | Measures 1/16 inches to 1/2 inches in increments of 1/64 inch
$13.70
Picture of General Tools 1/16"X1/2"X64Ths Hobbydrill Gage Part# 24 (5 Ea)

General Tools 1/16"X1/2"X64Ths Hobbydrill Gage Part# 24 (5 Ea)

IDENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings | 29 MEASURING HOLES- Identified drill bits from 1/16 Inch to 1/2 Inch in 1/64th increments | ETCHED MARKINGS- Black graduations to give high contrast and will not wear off | NO MATH- Shows drill sizes in both inches and decimal equivalents | DURABLE- Made from heavy duty, rustproof stainless steel | 2-3/8" x 6-3/4" overall | 2-3/8" x 6-3/4" overall
$36.29
Picture of General Tools 1/2" Hss Countersink Part# 195-1/2 (1 Ea)

General Tools 1/2" Hss Countersink Part# 195-1/2 (1 Ea)

1/2" HS Countersink | General Tool's countersink drill bit is the perfect drill bit for finishing the woodworking project right | The drill bit has a 1/4 inch round shank; countersinking screws gives wood projects that beautiful finished and complete look | Drill bit has a diameter of 1/2"; useful in making furniture, cabinets, shelves and small wood projects | This high speed countersink has a 6 flute rose pattern for chatter free countersinking; works effectively on steel, brass, aluminum, plastic and wood | Countersink bit is made of high-speed steel with six flutes. 82 degree point angle
$4.61
Picture of General Tools 1/4" Arch Punch Part# 1271A (3 Ea)

General Tools 1/4" Arch Punch Part# 1271A (3 Ea)

The General Tools and Instruments 1271A Arch Punch is the ideal punch tool for punching a 1/4 inch hole | The punch works on leather, rubber, canvas, plastic, sheet metal, gasket material, cardboard and softer metals | The internal punch features an inside taper for clearance | The punches are heat treated forged steel, ensuring long lasting performance | Because of this heat treatment, the cutting edge will stay sharper longer
$27.77
Picture of General Tools 1/4" To 1-1/2"Od Tubingcutter W/Rollers Part# 125 (3 Ea)

General Tools 1/4" To 1-1/2"Od Tubingcutter W/Rollers Part# 125 (3 Ea)

Wide, hardened, flared, grooved rollers allow cuts close to a flared end to avoid tube replacement in existing installations | Full-size, fold-out reamer with two cutting edges for deburring pipe | Large fluted knob increases applied torque | Contoured shape and comfort grip | Full-size wheel is made of bearing tool steel and replaceable (#RW121/2 or #RW122) | Storage space in handle for extra wheel
$62.62
Picture of General Tools 1/4"-1-5/8"Od Pvc Cutter Part# 119 (1 Ea)
Picture of General Tools 1/8" To 1/2" Repairmansreamer Part# 130 (1 Ea)
Picture of General Tools 1/8" To 5/8"Od Tubingcutter-Mini-W/Rollers Part# 123R (5 Ea)

General Tools 1/8" To 5/8"Od Tubingcutter-Mini-W/Rollers Part# 123R (5 Ea)

Comfort grip design for easy one hand turning with large fluted adjusting knob for greater torque | Full size bearing tool steel cutter wheel cuts copper, aluminum, brass and thin wall tubingand stainless steel | Wide hardened flared grooved rollers allows true cuts close to flared end tubing to avoidtube replacement in existing installations | 1/8 inch to 5/8 inch capacity | Replaceable cutting wheel model # RW121/2
$57.45
Picture of General Tools 1/8"To 1-1/8"Od Tubingcutter W/Rollers Part# 120 (5 Ea)

General Tools 1/8"To 1-1/8"Od Tubingcutter W/Rollers Part# 120 (5 Ea)

Wide hardened flared grooved rollers allow cuts close to a flared end to avoid tube replacement in existing installations | Full-size fold-out reamer with two cutting edges for deburring pipe | Tubing O D range 1/8 in to 1-1/8 in | Full-size wheel is made of bearing tool steel and replaceable (#RW121/2 or #RW122) | Storage space in handle for extra wheel
$64.07
Picture of General Tools 10-Pc Mini Screwdriverset Part# 690 (1 St)

General Tools 10-Pc Mini Screwdriverset Part# 690 (1 St)

Designed for rapid rotation | Ergonomic design for added comfort | Available in a 10 piece set | Package dimensions:9.8"L x 6.0"W x 0.85"H
$24.48
Picture of General Tools 1-1/2" Arch Punch Part# 1271Q (1 Ea)

General Tools 1-1/2" Arch Punch Part# 1271Q (1 Ea)

The General Tools and Instruments 1271Q Arch Punch is the ideal punch tool for punching a 1-1/2 inch hole | The punch works on leather, rubber, canvas, plastic, sheet metal, gasket material, cardboard and softer metals | The internal punch features an inside taper for clearance | The punches are heat treated forged steel, ensuring long lasting performance | Because of this heat treatment, the cutting edge will stay sharper longer
$36.79
Picture of General Tools 1-1/4" Adj. Inspectionmirror-6" Arm Part# 555 (1 Ea)

General Tools 1-1/4" Adj. Inspectionmirror-6" Arm Part# 555 (1 Ea)

Package dimensions: 3.3 cms L x 7.9 cms W x 22.0 cms H | Package quantity: 1 | Product type: Lamp | Country of Origin: United States
$8.24
Picture of General Tools 1-1/4" Arch Punch Part# 1271O (1 Ea)

General Tools 1-1/4" Arch Punch Part# 1271O (1 Ea)

The General Tools and Instruments 1271O Arch Punch is the ideal punch tool for punching a 1-1/4 inch hole | The punch works on leather, rubber, canvas, plastic, sheet metal, gasket material, cardboard and softer metals | The internal punch features an inside taper for clearance | The punches are heat treated forged steel, ensuring long lasting performance | Because of this heat treatment, the cutting edge will stay sharper longer
$27.37
Picture of General Tools 1-1/8" Arch Punch Part# 1271N (1 Ea)

General Tools 1-1/8" Arch Punch Part# 1271N (1 Ea)

The General Tools and Instruments 1271N Arch Punch is the ideal punch tool for punching a 1-1/8 inch hole | The punch works on leather, rubber, canvas, plastic, sheet metal, gasket material, cardboard and softer metals | The internal punch features an inside taper for clearance | The punches are heat treated forged steel, ensuring long lasting performance | Because of this heat treatment, the cutting edge will stay sharper longer | The General Tools and Instruments 1271K Arch Punch, 1-1/8 inch is meant for punching a 1-1/8 inch hole | The punch works on leather, rubber, gasket material and softer metals | The internal punch features an inside taper for clearance | The punches are heat treated forged steel, ensuring long lasting performance | Because of this heat treatment, the cutting edge will stay sharper longer
$21.21
Picture of General Tools 11009 Tube Bender Set Part# S106 (1 Set)

General Tools 11009 Tube Bender Set Part# S106 (1 Set)

Steel Spring Tubing Benders are a simple and effective means of bending thin-wall tubing without crimping or collapsing the pipe | The Tubing Benders are made from oil hardened and tempered spring steel with a zinc-plated finish | This set contains 6"popular bending sizes capable of making bends up to 180 degrees | For best results, General recommends using one bender over the tube and an additional bender inside the tube. | Tube size outside diameters are 1/4, 5/16, 3/8, 7/17, 1/2, and 5/8 inches
$12.90
Picture of General Tools 12" Digital Caliper Part# 14712 (1 Ea)
Picture of General Tools 12" Flat Leg Outside Caliper Part# 452-12 (2 Ea)

General Tools 12" Flat Leg Outside Caliper Part# 452-12 (2 Ea)

General Tools outside calipers is a useful measurement transfer tool when working with round stock or oddly shaped materials and then transferring that measurement to a ruler | The forged steel legs on this caliper feature hardened points for precise marking of the work piece; An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment | Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this outside caliper | General Tools calipers have hardened measurement faces and meets government specifications GGG-C-95; This outside caliper has 12-3/4 inch legs and a 12-1/4 inch jaw capacity | General Tools outside calipers are frequently used in conjunction with General Tools precision rulers for the most accurate measurement transfer
$69.04
Picture of General Tools 12" Flex Precisionss Rule Part# 1201Me (1 Ea)

General Tools 12" Flex Precisionss Rule Part# 1201Me (1 Ea)

HANGER HOLE: enjoy easy storage with an added hanger hole | RUST PROOF: Stainless Steel design | DOUBLE SIDED: 300mm Flexible Steel Rule is ideal for making exact linear measurements | METRIC/ENGLISH GRADUATIONS: Ultra-fine black graduations , Every 1/2mm and 32nd, 8th and 16th of an inch | MADE IN THE USA
$7.40
Picture of General Tools 12" Ridgid 4R Rule Part# Cf1264 (1 Ea)
Picture of General Tools 130068 Reamer Part# 131 (5 Ea)

General Tools 130068 Reamer Part# 131 (5 Ea)

Screwdriver Handle Reamer (1/8" - 3/8")
$75.05
Picture of General Tools 150Mm Flex Ss Rulew/Pocket Clip Part# 300Mm (1 Ea)

General Tools 150Mm Flex Ss Rulew/Pocket Clip Part# 300Mm (1 Ea)

Graduation in millimeters and .5 millimeters | Ultra fine black graduations | Polished stainless steel finish, convenient pocket clip and comes in a plastic case. | Length is 150mm long and width is 15/32 inch | Made in the USA
$2.51