Regulator is preset at 50PSIG | Single-stage construction | Polycarbonate flow tube and hood are impact resistant for maximum durability and service life | Calibrated for argon, helium, carbon dioxide and 75% argon/25% carbon dioxide mixed gases | Flowmeter is backpressure compensated to ensure accurate readings
Before disconnection, gas must be shut off at regulators | Built-in automatic reset check valve prevents reverse flow of gases by cutting off the gases under back pressure | Color codes provide speed and safety | QC-RHF-A has A-Connection
Welds up to 3/16 Inch and cuts up to 1/2 Inch - will weld up to 1-1/4 Inch and cut up to 6 Inch with optional larger tips | A light to medium duty portable outfit that is extremely popular for general maintenance work, metal sculpture, automotive repair, air conditioning, refrigeration, etc | The carrier is made of tough, lightweight polypropylene and is designed to carry one "MC" acetylene cylinder, and one "R" (20 cu. ft.) oxygen cylinder and apparatus | Featured with this outfit are rear entry regulators for better balance on the small cylinders. The acetylene regulator has an "MC" (CGA 200) inlet connection and the oxygen regulator has the standard CGA 540 connection | The outfit is available with or without cylinders, or carrier; Plastic carrier is available separately | Outfit come with Torch End Check Valves
Cutting range: 3" | Head angle: 90° | Use with torch handle: 140T, 141T, 141TA, 342T | Use with cutting tip: 172C, 172CN, 172CP, 172CG | Victor equivalent: CA1260
Brass Bar Stock coupling nut and double o-ring seal gives quick, hand tight, and leak-free operation | Push type oxygen valve provides smooth on/off oxygen flow control | Spiral mixer gives optimum mix of fuel and oxygen | Stainless steel oxygen lever for durability | Stainless steel tubes for strength and long life
Welding Range: 1-1/4" | Use with cutting attachment: 142T | Use with welding nozzle: 172W, 172WRTEN, 872W | Use with heating nozzle: 172H, 172HN, 872H | Victor equivalent: 100C
Maximum Inlet: 400 PSI | Maximum Delivery Pressure: 2-15 PSI | Inlet Connection: CGA510, Outlet Connection: 9/16"-18LH(M) | Forged brass body and housing cap | Delrin-cap bushing for smooth adjustments
Before disconnection, gas must be shut off at regulators | Built-in automatic reset check valve prevents reverse flow of gases by cutting off the gases under back pressure | Color codes provide speed and safety | QC-RHF-A has A-Connection