GUARDIAN

Price For: Each Item: Replacement Wash Bowl Type: Eyewash Country of Origin (subject to change): United States | Guardian Equipment | Plastic Bowl | Orange

15 gallon stainless steel pressurized tank. Tank has built-in carrying handles, Schrader air intake valve, pressure gauge and pressure relief valve. Tank has about 10 gallons usable capacity | Two GS-Plus spray heads, each with a “flip top” dust cover, internal flow control and filter. 1/2” IPS chrome plated brass stay-open ball valve with flag handle | Drench Hose: Single GS-Plus spray head with “flip top” dust cover, internal flow control and filter. Chrome plated brass squeeze valve with stainless steel lever handle and 6 ft. reinforced PVC hose | Quality Assurance: Unit is fully assembled, pressurized and water tested at the factory. Unit is depressurized and emptied prior to shipping. Some assembly required in field

16 gallon capacity safety green polyethylene tank. Tank has built-in carrying handle, heavy wall construction and reinforced ribs to support weight of unit | Heating pads are made of silicone rubber. The total amp draw of the unit is 4A and delivers 410 Watts of power, which allows the unit to operate to temperatures as low as -20° F | The electronic temperature controller has an easy to read LCD screen for viewing the temperature and a green LED status indication light to let the user know when the heating pads are activated | Ground Fault Plug: Unit comes standard with a highly visible yellow 15A GFCI Ground Fault-Manual Reset connected to a 9 foot long cord | Spray Head Assembly: Water flow is activated by pulling down on bright yellow eyewash tray. Integral full flow nozzles deliver soft spray of water. Swing tray up to storage position to stop flow

Size: 22" Wx22" Dx22" H | Capacity: 16 gallons | Includes polyethylene tank, 3' long drain hose, and steel mounting bracket | Country of origin: United States

Guardian. Eye/Face Wash Wall Mounted-ABS | Size: 11 1/2" Diameter. Approvals: Meets ANSI Z358.1-2004 | Guardian

EEyewash For mounting on counter next to sink | spray heads Swivel 90 degrees from storage to operational position | Water flow is activated by flag handle | Inlet size 1/2 in npt(m) | waight 4 lb

EEyewash For mounting on counter next to sink | spray heads Swivel 90 degrees from storage to operational position | Water flow is activated by flag handle | Inlet size 1/2 in npt(m) | waight 5 lb

4-HEAD EYE/FACE WASH PEDESTAL MOUNTED Country of Origin: UNITED STATES NOTE: This is a

Price For: Each Fitting Material: Chrome Plated Brass Height: 9-1/2" ANSI Compliant: Yes Number of Heads: 4 Bowl Dia.: 11-1/2" Eye Wash Activates By: Push Handle Assembled/Unassembled: Assembled Standards: ANSI Z358.1-2014 Depth: 13-3/4" Spray Head Material: Polypropylene Eyewash Covering: No Includes: ANSI Compliance Sign Head Dia.: 1-1/2" | Fitting Size: 1/2" NPT Female Valve Material: Chrome Plated Brass Eye Wash and Shower Mounting: Wall Pipe Material: Chrome Plated Brass Item: Eye/Face Wash Width: 15-1/2" Eye Wash Handle Material: Aluminum ADA Compliance: No Eyewash Bowl Material: Stainless Steel Color: silver Country of Origin (subject to change): United States

G5020

Ideal For rinsing any part of user's Eye, face or body | Single fs-plus spray head has “flip top” dust cover, internal flow Control and filter to remove impurities from the water flow | Forged brass squeeze Valve activated by stainless steel lever handle | Valve has replaceable stainless steel seat for exceptional durability | waight 3 lb

Ansi-compliant identification sign | Swivel-type inlet | Valve has replaceable stainless steel seat for exceptional durability | Forged brass squeeze valve activated by stainless steel lever handle | waight 4 lb

Converts any faucet into an emergency Eye wash station without interfering with normal faucet operation | Float off dust covers to protect outlet heads | Forged brass diverter Valve | Outlet heads are mounted 5" apart and are adjustable aerated outlet heads | waight 1 lb

Converts any faucet into an emergency Eye wash station without interfering with normal faucet operation | AdJustable aerated outlet heads | Float off dust covers to protect outlet Heads | Forged brass diverter valve | waight 1 lb

Combination eyewash and shower safety station | Shower head: 10Diameter orange abs plastic | Shower valve: 1Ips chrome plated brass stay-open ball valve | Spray head assembly: two gs-plus spray heads | Eye/face wash bowl: 11-1/2Diameter stainless steel bowl

Eye wash is activated by flag handle , Two gs-plus spray-type outlet heads deliver a flood of water For rinsing Eyes | Shower valve: 1” ips chrome plated brass stay-open ball valve, furnished with stainless Steel actuating arm and 29” stainless Steel pull rod | Spray Head assembly: Two gs-plus Spray Heads each has a “flip top” dust cover, internal flow Control and filter to remove impurities from the Water flow | Eye wash valve: 1/2” ips chrome plated brass stay-open ball valve | waight 39 lb

package dimensions :34.798 cm L x 35.56 cm W x 32.258 cm H | Product Type :SAFETY SUPPLY | country of origin :United States | package weight :3.13lbs | Quality Assurance: Unit is completely assembled and water tested prior to shipment

Safety station with eye/face wash and shower to help flush hazardous substances from clothes and body and rinse hazardous substances from face and eyes | Orange shower head with 10" diameter is made of ABS for durability | Two spray heads each with internal flow control and a filter to help remove impurities from the water flow | Shower has stay-open 1" IPS ball valve that is made of chrome plated brass and has PTFE seals | Eye/face wash with stay-open 1/2" IPS ball valve that is made of chrome plated brass and has PTFE seals

Guardian. Eye/Face Wash Wall Mounted | Size: 11 1/2" Diameter. Approvals: Meets ANSI Z358.1-2004 | Guardian | Guardian. Eye/Face Wash Wall Mounted | Guardian

Spray head assembly: Two FS-Plus spray heads. | Valve: 1/2" IPS chrome plated brass stay-open ball valve. | Bowl: 11 1/2" diameter stainless steel. | Pipe and fittings: Schedule 40 galvanized steel. | Supply: 1/2" NPT female inlet / Waste: 1 1/4" NPT female outlet.