KLEIN TOOLS

Precision-machined tip provides accurate fit and torque without slippage | Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance | Tip-Ident quickly identifies the screwdriver type and tip orientation | Internal flanges inside handle provide solid, twist-resistant blade anchor | Made in USA | Overall length: 6-3/4-Inch, shank length: 3-Inch | Tip is precision-machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers | Provides accurate fit and torque without slippage | 3-Inch round-shank | Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product

Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers | Precision-machined tips for exact fit into fastener | Contains 2 bits | Made in the USA

Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches | Bends 10, 12 and 14 AWG wire | Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance | Internal flanges inside handle provide solid, twist-resistant blade anchor | Made in USA | Special heat-treated shafts | Precision-machined tip for exact fit

Precision machined Phillips tip provides a more consistent geometric symmetry than conventional Phillips screwdrivers to accurately fit and torque without slippage | Tip-Ident quickly identifies the screwdriver type and tip orientation and Cushion-Grip handle for greater torque and comfort | Premium chrome-plated for smooth feel and corrosion resistance | Internal flanges inside handle provide solid, twist-resistant blade anchor | Made in USA

Precision-machined tip provides accurate fit and torque without slippage | Tip-Ident quickly identifies the screwdriver type and tip orientation | Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance | Internal flanges inside handle provide solid, twist-resistant blade anchor | Made in USA | Special heat-treated shafts | Meets or exceeds applicable ASME / ANSI specifications

Precision-machined tip provides accurate fit and torque without slippage | Tip-Ident quickly identifies the screwdriver type and tip orientation | Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance | Internal flanges inside handle provide solid, twist-resistant blade anchor | Made in USA | Special heat-treated shafts | Meets or exceeds applicable ASME / ANSI specifications

Screwdriver works on most combination head receptacle, switch and panel screws | Tip-Ident color-coded handle end quickly identifies the screwdriver type and tip orientation | Special heat-treated, chrome plated shaft for corrosion resistance and Cushion-Grip handle for greater torque and comfort | Internal flanges inside handle provide solid, twist-resistant blade anchor | Made in USA | Precision-machined tip for exact fit | Meets or exceeds applicable ASME / ANSI specifications

Screwdriver has oversized handle that is 35-percent larger than comparable screwdriver handles and delivers up to 50-Percent extra power to perform tough jobs with minimum effort | Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably | Chrome-plated shaft helps prevent corrosion | Internal flanges provide solid, twist-resistant shaft anchor | Made in USA | Nickel-chrome, precision-forged and polished blades with black tips | Meets or exceeds applicable ASME / ANSI specifications

Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers | Precision-machined tips for exact fit into fastener | Contains 2 bits: #2 Phillips, 1/4-Inch Slotted

Precision-machined tip provides accurate fit and torque without slippage | Tip-Ident quickly identifies the screwdriver type and tip orientation | Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance | Internal flanges inside handle provide solid, twist-resistant blade anchor | Made in USA | Special heat-treated shafts | Meets or exceeds applicable ASME / ANSI specifications

Bits drill through nails, wood, vinyl, plastics, and heavy timber | Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring | Head and twist are ground to correct clearance for easy removal from hole | Feed-screw pilot draws bit into wood | Full length is heat-treated and tempered | For heavy construction and repair work in mines, on docks and bridges as well as electrical work

Cold Chisel cuts, shapes and removes metal | Blade Width: 1-Inch | Heat-treated, high-carbon steel for necessary hardness and durability | Corrosion resistant black finish | Made in USA | Overall Length: 8-1/2-Inch | Weight: 1.31 pounds

IPS Diam. X Length: 1-Inch x 44-Inch | bender handle only; fits Klein-Benfield Benders: 51203, 51205 | HI-VIZ yellow handles are easy to spot on the jobsite | Provides the proper leverage for use with all Klein's Benfield benders | Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product.

Specifically designed for locking out power sources such as disconnects, switches, and panel boxes | Double interlocking hasp of tempered steel with patented interlocking tabs for extra security | Hasps are bright zinc-plated | Riveted construction | Six-hole locking bodies coated with red vinyl plastic | Holes will accept up to 5/16-Inch (8 mm) diameter shackles

Cold Chisel cuts, shapes, and removes metal | Blade Width: 1-Inch | Correctly ground edge and long length work better in hard-to-reach areas | Heat-treated, high-carbon steel for necessary hardness and durability | Made in USA | Corrosion-resistant black finish | Overall Length: 12 inch

Swivel clevis on this forged hook will engage with snap on Klein block and tackle Cat. Nos. 1802-30 and H1802-30 | Swivel prevents twisting and kinking of rope | Maximum safe load 750-pounds (340 kg) | 1-3/16-Inch x 1-Inch (3 cm x 2.5 cm) Swivel Opening and 1-7/8-Inch (4.8 cm) Throat Opening | Made in USA | These are NOT occupational protective devices. NOT for human support

Pin Punch with corrosion-resistant black finish | Precision-ground shank | Heat-treated for added strength and hardness at the working end | Made in USA | Point Diameter: 1/16-Inch | Overall Length: 4-1/4-Inch | Weight: 0.80 oz (22.7 g)

1/2-Inch hex standard length with 12-point socket | 1/2-Inch drive size | Chrome finish for lasting protection | Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product

3/8-Inch drive size | Chrome finish for lasting protection | Made of forged alloy steel | 6 Points

Center Punch with rugged design for impact strength | Smooth-ground points heat-treated to stay sharp and true longer | High-carbon steel for durability and corrosion-resistant black finish | 1/2-Inch shank diameter | Made in USA | 6-Inch overall length | Weight: 0.25 lb (0.11 kg)

Nine 12-point sockets: 7/16-Inch, 1/2-Inch, 9/16-Inch, 5/8-Inch, 11/16-Inch, 3/4-Inch, 13/16-Inch, 7/8-Inch and 15/16-Inch | Includes a 5/8-Inch spark plug socket and ratchet | Features a 5-Inch (127 mm) long extension | Hinged metal box keeps everything in one place | 13-pieces (with case)

Thirteen 12-point sockets: 7/16-Inch, 1/2-Inch, 9/16-Inch, 5/8-Inch, 11/16-Inch, 3/4-Inch, 13/16-Inch, 7/8-Inch, 15/16-Inch, 1-Inch, 1-1/16-Inch, 1-1/8-Inch, and 1-1/4-Inch | Socket Extension: 5-Inches (12.7 cm) long | Flex handle: 17-Inches (432 mm) long | Ratchet | Hinged metal box

Socket Wrench drive type: Hex | Deep socket depth | Includes sockets that are long to get into deeper spaces with ease | 1/2-Inch, 9/16-Inch, 5/8-Inch, 11/16-Inch, 3/4-Inch, 13/16-Inch, 7/8-Inch, and 15/16-Inch sizes | Includes hinged metal box for easy storage

General-purpose, high-speed bit for reliable performance in a wide range of materials | Standard jobber length | Black-oxide finish reduces chip welding | Lightly roughened surface has higher lubricity for easier chip flow | Made in USA

Cold Chisel cuts, shapes, and removes metal | Correctly ground edge and long length work better in hard-to-reach areas | 1/2-Inch blade width | Heat-treated, high-carbon steel for necessary hardness and durability | Made in USA | Corrosion resistant black finish

Exclusive hollow shaft design with Rare-Earth magnetic tip features unobstructed pass-through, even on long bolts | Full hollow shaft facilitates work on long bolt applications | Cushion-Grip handle allows for greater torque and comfort and handle dome is color coded for easy identification | Internal flanges provide solid, twist-resistant shaft anchor | Made in USA | Cushion-Grip handle that allows for greater torque and comfort | Internal flanges that provide solid, twist-resistant shaft anchor | Premium chrome plating for smooth feel and corrosion resistance | Full hollow shaft design with Rare Earth magnetic tip | Hex Size: 1/2-Inch Overall Length: 7-5/16-Inch Shank Length: 3-Inch Weight: 0.25-Pound