Search

MITUTOYO

MITUTOYO
Sort by
Display per page
Picture of Mitutoyo .0001-.5Inc Part# 2358A-10 (1 Ea)

Mitutoyo .0001-.5Inc Part# 2358A-10 (1 Ea)

The revolutionary stem-bush design for trouble free stem clamping and longer clamping range. | No through screw-hole on the frame for high dust-resistance. | Greater rigidity in the bearing plate for reducing the tracing error
$249.68
Picture of Mitutoyo .0005"-.5" Lug Back Digimatic Indicator Part# 543-392 (1 Ea)

Mitutoyo .0005"-.5" Lug Back Digimatic Indicator Part# 543-392 (1 Ea)

Unique side payout design reduces wear on the entry guide bushing and cable for smooth operation with less drag | Engineered spring retraction tension designed not to pull or drag on a worker to improve productivity and reduce fatigue | Dual swivels included on all cable models to prevent lifeline from twisting during use | New and improved load indicators identify when the unit needs to be removed from service | No annual factory recertification required (Except Canada)
$575.49
Picture of Mitutoyo .010-.500" Radius Gage Set W/26 Leaves Part# 186-906 (1 Set)

Mitutoyo .010-.500" Radius Gage Set W/26 Leaves Part# 186-906 (1 Set)

5 Radii per Leaf | Each gage is marked with the radus size | Use to check concave or convex radius | Supplied with gage holder | Supplied with fitted plastic case
$194.94
Picture of Mitutoyo .093-1" V-Anvil Micrometer 3-Flutes Part# 114-202 (1 Ea)

Mitutoyo .093-1" V-Anvil Micrometer 3-Flutes Part# 114-202 (1 Ea)

Carbide tipped anvil | Clear graduations on satin chrome finish | Hammertone baked enamel finish | Ratchet Stop | Supplied in fitted plastic case
$581.07
Picture of Mitutoyo .1005" Square Steel Part# 614125-531 (1 Ea)

Mitutoyo .1005" Square Steel Part# 614125-531 (1 Ea)

Grade 0 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish | High-carbon, high-chrome steel provides high hardness and wear-resistance | Square base for accurate wringing, to attain a height reference standard, and to make a dedicated inspection jig | Nominal length (in inches) indicated with laser-etched, black characters | Identification number etched in block for traceability
$34.13
Picture of Mitutoyo .118-.197" Small Hole Gage Part# 154-105 (1 Ea)
Picture of Mitutoyo .197-2.95" Small Hole Gage Part# 154-106 (1 Ea)
Picture of Mitutoyo .200"Dia Edge Finder 3/8" Shank Part# 50101 (1 Ea)

Mitutoyo .200"Dia Edge Finder 3/8" Shank Part# 50101 (1 Ea)

Used in a milling machine to find the workpiece edge | All working surfaces are hardened and ground
$15.92
Picture of Mitutoyo .295-.393" Small Hole Gage Part# 154-107 (1 Ea)
Picture of Mitutoyo .315-.50" Telescoping Gage Part# 155-121 (1 Ea)
Picture of Mitutoyo .393-.511" Small Hole Gage Part# 154-108 (1 Ea)
Picture of Mitutoyo .50-.748" Telescoping Gage Part# 155-122 (1 Ea)

Mitutoyo .50-.748" Telescoping Gage Part# 155-122 (1 Ea)

Spring-loaded plunger expands within the bore (or groove), allowing determination of the internal diameter (or groove width) | With a knurled clamp
$36.94
Picture of Mitutoyo .550-1" 10-Leave Radiusgage Part# 186-907 (1 St)

Mitutoyo .550-1" 10-Leave Radiusgage Part# 186-907 (1 St)

9 Radii per Leaf | Concave and convex radii on each leaf | Supplied in plastic pouch | Measurement Graduations: .05 inches
$649.80
Picture of Mitutoyo .62" Flat Head Screw Part# 619058 (1 Ea)
Picture of Mitutoyo .67"Dia. Center Punch Part# 985-117 (1 Ea)
Picture of Mitutoyo .800" Setting Ring Part# 177-287 (1 Ea)
Picture of Mitutoyo 0.08"  Rect  Steel  Asme0 Part# 611108-531 (1 Ea)
Picture of Mitutoyo 0.100"  Square  Steel  As-1 Part# 614191-541 (1 Ea)
Picture of Mitutoyo 0.1009"  Rect  Steel  Asme 0 Part# 611129-531 (1 Ea)
Picture of Mitutoyo 0.141"  Rect  Steel  Asme 0 Part# 611181-531 (1 Ea)
Picture of Mitutoyo 0.143"  Square  Steel  As-1 Part# 614183-541 (1 Ea)
Picture of Mitutoyo 0.4-7Mm Pitch Gage Set W/18 Leaves Part# 188-121 (1 St)
Picture of Mitutoyo 0-.500" Micrometer Head Part# 148-502 (1 Ea)
Picture of Mitutoyo 0-.500" Micrometer Head Part# 149-185 (1 Ea)
Picture of Mitutoyo 0-.500" Standard Micrometer Head Part# 148-501 (1 Ea)

Mitutoyo 0-.500" Standard Micrometer Head Part# 148-501 (1 Ea)

Vernier scale in inch units for taking precise measurements | Small size for measurements to 0.5” | Adjustable zero-setting helps provide accuracy | Satin chrome finish helps resist rust and reduce glare | Lapped measuring face helps provide accuracy
$72.58
Picture of Mitutoyo 0.70"  Rect  Steel  Asme0 Part# 611197-531 (1 Ea)
Picture of Mitutoyo 0-1" (15") Point Micrometer Part# 112-177 (1 Ea)

Mitutoyo 0-1" (15") Point Micrometer Part# 112-177 (1 Ea)

Vernier Caliper,Satin Chrome,7" Jaw D | Precision Measuring - Calipers
$253.72
Picture of Mitutoyo 0-1" (30") Point Micrometer Part# 112-225 (1 Ea)
Picture of Mitutoyo 0-1" (30Deg) Point Micrometer Part# 112-237 (1 Ea)

Mitutoyo 0-1" (30Deg) Point Micrometer Part# 112-237 (1 Ea)

Point micrometer measures 0 to 1.0" with 0.001" graduations and + or - 0.00015" accuracy, for measuring web thickness of drills, small grooves, keyways, and other hard-to-reach areas | Standard scale in inches | Points are 30 degrees and carbide-tipped for durability | Ratchet stop to help provide uniform pressure for precise, repeatable measurements | Hammertone baked-enamel finish for durability
$273.54